Expedition I Wood Insert

Starting at $3,188

Product only. Pricing exclusions apply. Contact a dealer for more information.

Big warmth comes to smaller spaces with the easiest wood insert to use. Fitting most fireplace openings, the Expedition I lets you load your wood, light the fire and enjoy the comfortable warmth. Even with its more compact size, you can enjoy up to six hours of heating on a full load of wood. There’s no need for you to stick around and tend to the fire; just savor the warm atmosphere with the easiest wood insert to use. The flush transitional look allows this insert to fit any room setting.

Standard 200-CFM fan delivers heat farther and faster into your room
Clean-burning non-catalytic system makes it easier to run and maintain wood insert
1.5-cu.ft. firebox holds 18” logs for long-lasting heat
Heats up to 1,400 sq. Ft. with 37,000 BTUs, based on climate and home efficiency

Expedition I Wood Insert

Key Features and Technologies

Learn more about key product features and technologies.

Automatic Combustion Control (ACC)

Automatic Combustion Control (ACC) is an advanced heat-management system from Quadra-Fire that maintains precision airflow for longer, cleaner and more efficient burns.

Quadra-Fire® Four-Point Burn System

The “four-point” Quad Burn combustion system has four cycles that extend the heat, enhance the fire and increase efficiency for durable, long-lasting performance.

Limited Lifetime Warranty

Our Limited Lifetime Warranty is the strongest and most comprehensive in the industry.

Environmental Protection Agency Approval

This appliance meets the U.S. Environmental Protection Agency’s emissions standards.

Is This Product Right For You?

Room Size: (Learn More)

Small

Medium

Large

Small

Medium

Large

Recommended Maintenance: (Learn More)

None

Annual

Monthly

Weekly

None

Annual

Monthly

Weekly

Model Comparison

Reset (View All Models)

Insert Finish

Finishes:

Classic Black

Surrounds

Two surround sizes are available – No trim required

Medium: 42 ¾” x 31”

Small: 38 ¾” x 27 ¾”

Two optional trim pieces available in medium and small size

Cast Iron Trim

Nickel Trim

Finishes:

Black Steel Surround

Finishes:

Cast Iron Trim on Black Steel Surround

Finishes:

Nickel Trim on Black Steel Surround

Shelves

The wood shelf mantel is available in 48”, 59” or 72” lengths and with designs that accent any room.

Supercast™ concrete is the perfect non-combustible material for a sturdy shelf mantel for indoors or outdoors, and adds a personal touch to your fireplace. Available either in 60 or 72-inch lengths.

Finishes:

Fillmore Mantel Shelf

Finishes:

Gifford Mantel Shelf

Finishes:

Ozark Mantel Shelf

The shelf mantel is the perfect accent to a brick fireplace and a place to showcase some of your most cherished mementos. Available either in 48, 59 or 72-inch lengths.

Available Finishes:

Primed MDF
Unfinished Distressed Knotty Alder
Unfinished Maple

Cove Gray Mantel Shelf - Non-Combustible

Midnight Mist Mantel Shelf - Non-Combustible

White Mantel Shelf - Non-Combustible

Tavern Brown Mantel Shelf - Non-Combustible

Washed Cedar Mantel Shelf - Non-Combustible

Weathered Barnwood Mantel Shelf - Non-Combustible

Dimensions in inches. Refer to installation/owner's manual for detailed specifications on installing this product. Hearth & Home Technologies reserves the right to update units periodically. Product installation must adhere strictly to instructions shipped with product.

Model Specifications

Expedition I

Size:	Small
Fuel Type:	Wood
Peak BTU/hr Output:	37,400
Heating Capacity:	Up to 1,300 sq ft
Maximum Burn Time:	6 hours
Firebox Capacity:	1.5 cu ft
Recommended Log Length:	18"
Viewing Area:	275 sq. in.
Efficiency:	LHV 70% , HHV 65%
Emissions:	1.9 grams/hour

Appliance Depth includes entire unit including depth of firebox and extension onto hearth.

BTU: 1st hour output uses high burn efficiency number. BTU will vary depending on the type of fuel used and moisture content of the fuel.

BTU/hr Input based on maximum feed rate per hour multiplied by approximately 8600 BTU, which is average BTU from a pound of pellets.

This is a general guide, see your local dealer for help in determining the product that best suits your heating needs based on climate, home efficiency, location of the heater, and air movement in the room.

Actual burn times will vary based on how the appliance is operated, load size, moisture content and type of wood used.

Fuel density and pellet shape will affect hopper capacity.

Weighted average LHV (Low Heating Value) & HHV (High Heating Value) efficiencies using data collected during EPA emissions test. HHV efficiency over 75% qualifies for the 2021-2023 Federal Tax Credit.

Heat output will vary depending on the type of fuel used. The flame and ember appearance may vary based on the type of fuel burned and the venting configuration used. Actual product appearance, including flame may differ from image shown. Refer to the owner's manual for complete clearance requirements and specifications. Product specifications and pricing subject to change without notice. For testing and listing information please refer to the owner's/installation manual.

*For select products: Heating capacity to be used as a guide only. See your local dealer for help in determining the product that best suits your heating needs based on climate and home efficiency.

†For wood-burning appliances: Actual burn times will vary based on how the appliance is operated, load size, moisture content and type of wood used, and installation.