Determining What Hearth Product is Right for You? Part 2 of 2
Weigh your options when adding a fireplace, stove or insert to your home.
Deciding what hearth product is right for your home and lifestyle is an important decision. In Part 1 of this blog, posted July 11, we covered the different kinds of hearth products available, fuels, features and benefits. Now in Part 2, we’ll talk about performance and installation.
Gas fireplaces
- Performance – direct vent models maintain indoor quality with sealed combustion systems that draw air needed for the fire from the outdoors, and exhaust 100% of all combustion byproducts outside the home. Some models are AFUE rated (annual fuel utilization efficiency), which means they are tested to the same standards as furnaces. Technologies like IntelliFire™ and FireBrick™ significantly boost efficiencies.
- Installation – Gas fireplaces can be installed almost anywhere in your home where natural gas or liquid propane is available. Installation is flexible due to zero clearance construction, which requires minimal space between the fireplace and wallboard or wood (combustible materials).
Wood fireplaces
- Performance – EPA-certified models provide heat for many hours on a single load of wood, and because the wood burns so completely, ash cleanup is much easier. They burn clean, expelling minimal pollutants into the outside air – some models produce as little as 3.1 grams per hour. Technologies like Quadra-Fire’s Four-Point Quad-Burn System and Harman’s FireDome™ boost performance and efficiencies considerably.
- Installation – Installation will vary by placement in the home, type of chimney, and the model of fireplace and surround materials chosen.
Fireplace inserts
- Performance – Direct vent gas inserts have two separate flexible liners (pipes) that are run up the existing chimney, terminating above the roof. One liner expels the fire’s combustion and the other brings in combustion air needed to feed the fire. Wood fireplace inserts have a stainless steel, flexible single liner (pipe) that is run up the chimney, terminating above the roof. Pellet fireplace inserts have a hybrid stainless steel vent system that runs vertically up the existing chimney, terminating above the roof.
- Installation – Upgrading an open masonry built wood fireplace with an energy efficient insert will make it much more efficient, can help to save money, and will transform your fireplace into an efficient heating unit.
Electric fireplaces
- Performance – Electric fireplaces don’t require venting and can be positioned anywhere near an electrical outlet.
- Installation – This is easy, depending on the unit chosen. It can be as simple as simply plugging in the unit.
Wood stoves
- Performance – EPA-certified units burn efficiently due to high temperatures, ample oxygen and sufficient burning of gases. They can produce long burns on a single load of wood with minimal ash to clean up and low outdoor air emissions. Technologies like Quadra-Fire’s Four-Point Quad-Burn System and Harman’s FireDome™ boost performance and efficiencies considerably.
- Installation – Wood stoves have a flue pipe that rises vertically from the stove through the roof, or horizontally through a wall and then vertically outside of the house to the roof.
Pellet stoves
- Performance – Many models have programmable thermostats that adjust heat output and control room temperature. Some can produce steady, regulated heat for nearly 24 hours on a single load of pellets, with very little ash. They emit extremely low outside air particulates. Examples of technologies that boost performance are Quadra-Fire’s Advanced Energy™ and Automatic Combustion Control™, and Harman’s Pellet Pro System™ and Exhaust Sensing Probe™.
- Installation – Pellet stoves require a flue pipe that extends horizontally through a wall or vertically through the ceiling to the outdoors.
For safe and reliable installation of all hearth products, we recommend that a professional installer certified by the National Fireplace Institute® perform all installation tasks. That person will also obtain necessary permits and arrange required inspections.
Now it’s time to visit to your local Quadra-Fire dealer, who will match you with the perfect hearth product for your home and lifestyle! Check them out here.
-
How to Replace a Wood-Burning Stove
Posted on Friday, September 16, 2022
-
Are Wood Stoves Worth the Money
Learn the pros and cons of owning a wood stove.
Posted on Thursday, September 29, 2022
-
Top Reasons to Buy a Wood Stove
Learn more about how a wood stove can transform your space in this in-depth guide.
Posted on Friday, August 26, 2022
-
Comparing Fireplace Inserts: What’s Best for You?
Fireplace inserts are an amazing addition to anyone's home, but which one is right for you? Learn more about gas, pellet, and wood fireplace inserts to find the perfect fit for your home.
Posted on Friday, July 29, 2022
Categories
Find a Dealer or Distributor
A dealer or distributor can help you with sales, service and support.
Search Now
Get in Touch
Check out our social media account
Need help? A dealer in your local area can help you with sales, service and support.
Complete the form below and your local dealer will be in touch.
Please fill in your contact information below and a local dealer will contact you directly about your project.